lahat

press room

Precision Piezo Stage for Microscope Objective and Optics Positioning

Precision Piezo Stage for Microscope Objective and Optics Positioning

Wednesday, 31 May 2017

400 μm closed-loop travel; 450 μm open-loop travel

Outstanding step-and-settle and scanning performance

Designed for use with larger, high numerical-aperture objectives

29 mm diameter clear aperture

All Wavelengths. 190 nm - 0.1 THz. TOPTICA at the LASER World of Photonics 2017

All Wavelengths. 190 nm - 0.1 THz. TOPTICA at the LASER World of Photonics 2017

Tuesday, 23 May 2017

TOPTICA Photonics will present their innovative lasers at the LASER World of Photonics (hall B2, booth 103). With the latest product releases, TOPTICA is able to offer a complete laser wavelength coverage from deep-UV (190 nm) to terahertz radiation (0.1 THz, corresponding to 3 mm). These lasers support a multitude of applications in biophotonics & microscopy, materials & metrology and quantum technology. 

TMC Introduces UltraDamp™ - Aggressive, High-Damping, Air-Vibration Isolation for OEMs

TMC Introduces UltraDamp™ - Aggressive, High-Damping, Air-Vibration Isolation for OEMs

Monday, 22 May 2017

PEABODY, MA —TMC, an industry leader in high-performance vibration isolation technology, introduces UltraDamp™, a very-high-damping pneumatic vibration isolation system that is ideal for vibration-sensitive applications with high-force, high- velocity X-Y motorized stages that require fast settling time of the payload. 

High-Speed, Direct-Drive Rotary Stage with Collet Chuck

High-Speed, Direct-Drive Rotary Stage with Collet Chuck

Monday, 08 May 2017

Optimized system design for maximum acceleration High-speed operation (up to 3000 rpm) Integral captive pneumatic collet-chuck for minimal part motion during clamping Type-D collet accepts 0.1 mm to 2 mm O.D. tubing Clear aperture and guide system for product feed-through Direct-drive brushless motor with optional water cooling for performance stability Maintenance-free, frictionless rotary union.

New Hexapod Targets Medium-Load, Ultra-Precision Applications

New Hexapod Targets Medium-Load, Ultra-Precision Applications

Monday, 08 May 2017

Six-degree-of-freedom positioning with linear travels to 60 mm, angular travels to 30°, and payloads up to 45 kg

Ultra-precision design with guaranteed positioning accuracy specifications

Minimum incremental motion to 20 nm in XYZ and 0.02 μrad in θxθyθz

Powerful controls and software with visualization of work and tool coordinate systems

TOPTICA presents new TopWave cw UV laser at 266 nm

TOPTICA presents new TopWave cw UV laser at 266 nm

Saturday, 29 April 2017

TOPTICA launches their first member of the new TopWave ultraviolet cw laser series that aims at industrial applications. The "TopWave 266" provides 150 mW cw output power at a wavelength of 266 nm and < 1 MHz linewidth. It stands out with an excellent power stability, ultra-low noise operation and a premium beam quality. 

Wavelength Special: Deep-ultraviolet (DUV)

Wavelength Special: Deep-ultraviolet (DUV)

Saturday, 29 April 2017

Deep-UV (DUV) laser light is ubiquitous in industry and research - be it in semiconductor lithography at 193 nm, angle-resolved photoemission spectroscopy (ARPES), photoluminescence studies or spectroscopy of wide band gap materials, Raman spectroscopy beyond the solar background, or exotic atomic (and nuclear) transitions in quantum technology.

However, DUV light is hard to produce and maintain. TOPTICA’s DLC TA-FHG pro lasers use the novel SUV technology to generate laser light at standard wavelengths from 205 nm to 300 nm. This results in a strong increase in DUV power and a lifetime warranty that are market-leading for tunable diode lasers. For even shorter wavelengths, KBBF crystals enable direct frequency-doubling in TOPTICA’s customized solutions which generates wavelengths as short as 190 nm.

Applications that require high laser power at 266 nm, TOPTICA’s new TopWave 266 is an ideal solution. It delivers 150 mW output power, combined with an excellent lifetime (>10,000 h) and low-noise operation. It is a turnkey system specialized for sophisticated measurement and production tasks in e.g. semicon inspection, lithography or Raman spectroscopy

Siskiyou 'One Wrench' Concept Improves Optical Mount Ease-of-Use

Siskiyou 'One Wrench' Concept Improves Optical Mount Ease-of-Use

Saturday, 29 April 2017

Siskiyou Corporation has introduced its “one wrench” concept to several of their optical mounts and adjustment mechanisms, including kinematic and gimbal mounts, translation stages, and laser diode holders/positioners.

Specifically, this means that all the adjustment, mounting and locking screws on the mount are operated using the same size (5/64" or 2.0 mm) hex wrench.  This enables the user to mount and align even complex optomechanical systems using literally a single wrench, thus enhancing convenience and ease-of-use.

TMC's latest innovation - Hybrid Honeycomb Breadboard

TMC's latest innovation - Hybrid Honeycomb Breadboard

Wednesday, 26 April 2017

Combines the stiffness and damping of a Steel Honeycomb Optical Breadboard with the precision of a machined aluminum plate. TMC's latest innovation, a monolithic honeycomb structure with a bonded face sheet, is ideal for optical sub-assemblies.  Hybrid Honeycomb is an engineered solution that is configured to your unique requirements.

 

Tunable narrowband midIR laser - Cobolt Odin

Tunable narrowband midIR laser - Cobolt Odin

Sunday, 02 April 2017

מקורות לייזר תת אדום בינוני ברי כוונון בעלי רוחב פס צר עבור מערכות קומפקטיות לניתוח גזים לא נפוצים (trace gas) עם רגישות ppb (חלקיקים למיליארד parts per billion).

New Tech Exhibition 23-24.5.2017

New Tech Exhibition 23-24.5.2017

Sunday, 19 March 2017

New-Tech Exhibition May 23-24, 2017 - The Hi-Tech and Electronics International Exhibition will take place at the the Israel Trade Fairs & Convention Center TLV. The New–Tech 2017 Exhibition is the largest and major exhibition of the Hi–Tech & Electronics in Israel. Several professional events and conferences will held in the framework of the exhibition .The conferences will include dozens of lectures in the various fields. These events will allow the exhibition visitors to be updated with all the innovations of the various industrial projects and with the scientific and academic innovations, all under the same roof.

מטרולוגיה אופטית בייצור

Monday, 13 March 2017

מטרולוגיה אופטית הינה כלי מכריע הנמצא בשימוש באוטומציה תעשייתית כדי להגביר את היצרנות ואת רמות האיכות באמצעות שעורי פיקוח ובדיקה של 100% . הודות לזינוקים האחרונים לעבר רזולוציה גבוהה יותר וקצבי חלונית (פריים) של חיישני תמונה וגוף המלווים בממשקי מצלמה בשלים בעלי רוחב פס גבוה כגון USB 3.0 , המטרולוגיה האופטית כיום מאפשרת ניתוח מהיר מאד עם דיוק חסר תקדים של אובייקטים דו-ממדיים ותלת-ממדיים. גיליון פתרונות זה מספק את השיקולים וההנמקות הנדרשים עבור אופן בחירת רכיבי המפתח הנכונים של המערכת, במיוחד מצלמות עבור יישומי מטרולוגיה שונים

Oasis Conference and Exhibition 2017

Wednesday, 01 March 2017

 

On February 27-28th , Lahat participated at the Oasis Conference and Exhibition 2017

held at David Intercontinental Hotel, TLV.

 

Isranalytica Show 2017

Wednesday, 01 February 2017

 

On January 24-25th , Lahat participated at the Isranalytica Show 2017 held at David Intercontinental Hotel, TLV.